Warehouse Flooring Restoration Melbourne
Your lease requires the floor restored to original condition. We handle everything—flooring removal, coating grinding, dynabolt repairs and surface finishing. One contractor, one scope, handover-ready results.
WAREHOUSE FLOORING CAPABILITIES
Our service covers the complete warehouse floor restoration scope for end-of-lease make good projects.
FLOORING REMOVAL
- Carpet tiles, broadloom and vinyl removal
- Ceramic, porcelain and quarry tile removal
- Adhesive and mortar bed ablation
- Epoxy coating and waterproofing membrane removal
- Gripper rods, underlay and all associated fixtures
- Waste removal and disposal included
GRINDING & REPAIRS
- Industrial concrete grinding and levelling
- Dynabolt hole core drilling and epoxy filling
- Crack injection with epoxy or polyurethane
- Expansion joint repair and resealing
- Slab stabilisation and levelling
- Surface preparation for coatings
SURFACE FINISHING
- Grind and seal in matte, semi-gloss or high-gloss
- Epoxy floor coatings for industrial use
- Line marking restoration and reinstatement
- Condition reports and documentation
- Lease compliance sign-off
- After-hours and weekend works available
STRIPPED BACK. RESTORED TO SPEC.
Your lease requires the floor handed back in its original condition — and warehouse floors take the full force of a tenancy. Coatings stripped, adhesives ground back, dynabolt holes core-drilled and filled, cracks injected, surface finished to the specification your lease requires. From carpet strip-out to epoxy recoat, we handle the full scope in one service — no separate contractors, no gaps between trades, one handover-ready result.
Why Choose Make Good Melbourne?
| Multiple Contractors | Make Good Melbourne | |
|---|---|---|
| Scope | Separate trades for each stage | Full service: removal, grinding, repairs and finishing |
| Equipment | Standard equipment with limited capability | Heavy-duty industrial grinders that fully ablate surfaces |
| Repairs | Basic mortar patching that fails | Structural epoxy injection, core drilling, polyurethane systems |
| Coordination | Multiple contractors, scheduling conflicts | Single point of contact, one schedule, one handover |
| Outcome | Variable finish quality, blame-shifting | Guaranteed handover-ready results |
WHAT'S INCLUDED IN THE SCOPE
Flooring Removal
Carpets, carpet tiles, vinyl, timber, ceramic, epoxy — whatever’s on the floor, it comes off. We remove the coverings and grind out what’s left behind: adhesive beds, carpet glue, tile mortar, failed coatings and waterproofing membranes. The slab underneath is left clean and ready for the next stage.
Floor Grinding
Years of forklift traffic leave floors uneven, pitted and coated in residue. Our industrial grinders level high spots, remove surface deterioration and prepare the slab for epoxy or grind-and-seal finishes. The result is a flat, consistent surface that meets the tolerances your lease and your next tenant require.
Dynabolt Repairs
Racking out means hundreds of anchor holes left in the concrete. We don’t just fill them — we core drill out the damaged concrete around each hole, pack with high-strength epoxy resin and grind flush. No raised edges, no weak spots, no voids. Floor restored.
Crack Injection
Cracks left untreated let water in and get worse under traffic. We inject low-viscosity epoxy or polyurethane to restore structural integrity and stop further movement. Failed expansion joints are resealed, damaged edges rebuilt with quartz-filled epoxy designed for heavy traffic. The floor leaves in better condition than it’s been in years.
Surface Finishing
Once the slab is restored, we apply the finish your lease requires. Grind and seal in matte, semi-gloss or high-gloss. Epoxy coatings where chemical resistance and durability are needed. Line marking to reinstate safety zones and traffic lanes. We work from your lease specification — no guessing, no overscoping.
A COMPLETE MAKE GOOD SERVICE
We coordinate warehouse floor restoration with line marking, painting and flooring reinstatement to deliver your end-of-lease project on time.
Flooring Reinstatement
Carpet tiles, vinyl, epoxy and timber flooring reinstated to original specification for lease handover.
Line Marking
Professional line marking for car parks, warehouses and industrial facilities to meet lease compliance requirements.
Painting
End of lease painting services for commercial and industrial properties across Melbourne.
Patching & Plastering
Professional patching and plastering for commercial make good projects across Melbourne.
Suspended Ceilings
Ceiling tile replacement and grid repairs to restore your commercial space to original condition.
Frequently Asked Questions
Got a project coming up?
We do makegoods all day, every day.
Let's talk scope.
Share the details and we'll come back to you with how we can help.